___________ is used to obtain a uniform mold density in squeezer machine.

___________ is used to obtain a uniform mold density in squeezer machine. Correct Answer Rubber

In the squeezer machine, squeezing a flat plate produces non-uniform sand density and mold softness, whereas rubber diaphragm squeezing distributes squeeze molding forces more uniformly and thus a uniform mold density is obtained.
Bissoy MCQ

Related Questions

An object X sinks in liquids P and Q but floats in liquid R. Which of the following conclusions can be made from these observations? A) Density of X is more than the density of P B) Density of X is less than the density of R C) Density of P is equal to the density of R D) Density of P is less than the density of R
In a press there are three types of printing machines A, B, and C. Machine A can print ten thousand pages in 8 hours, machine B can do the same task in 10 hours, and machine C can do the same task in 12 hours. All three machines start the task at 9∶00 a.m. Machine A breaks down at 11∶00 a.m. and machines B and C continue working. At 12∶00 noon machine B also breaks down and machine C alone has to complete the remaining task. What is the approximate time of completion of the task?
Suppose we want to design a synchronous circuit that processes a string of 0’s and 1’s. Given a string, it produces another string by replacing the first 1 in any subsequence of consecutive 1’s by a 0. Consider the following example. Input sequence: 00100011000011100 Output sequence: 00000001000001100 A Mealy Machine is a state machine where both the next state and the output are functions of the present state and the current input. The above mentioned circuit can be designed as a two-state Mealy machine. The states in the Mealy machine can be represented using Boolean values 0 and 1. We denote the current state, the next state, the next incoming bit, and the output bit of the Mealy machine by the variables s, t, b and y respectively. Assume the initial state of the Mealy machine is 0. What are the Boolean expressions corresponding to t and y in terms of s and b ?
Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
S1: The similarity between the human body and a machine is rather superficial.
P: Beyond that, comparison fails.
Q: No machine grows in size; no machine sees, hears or feels.
R: It can be summed up in the statement that both require fuel and oxygen and obtain energy.
S: No machine thinks.
S6: The points of difference far outweigh the points of resemblance.

The Proper sequence should be:
A person X from a place A and another person Y from a place B set out at the same time to walk towards each other. The places are separated by a distance of 15 km. X walks with a uniform speed of 1.5 km / hr and Y walks with a uniform speed of 1 km / hr in the first hour, with a uniform speed of 1.25 km / hr in the second hour and with a uniform speed of 1.5 km / hr in the third hour and so on. Which of the following is / are correct? 1. They take 5 hours to meet. 2. They meet midway between A and B. Select the correct answer using the code given below:
An electric motor drives a machine through a speed reducing gear of ratio 9:1. The motor armature, with its shaft and gear wheel, has moment of inertia 0.6 kg-m2. The rotating part of the driven machine has moment of inertia 45 kg-m2. The driven machine has resisting torque of 100 N-m and the efficiency of reduction gear is 95%. Find the power which the motor must develop to drive the machine at a uniform speed of 160 r.p.m.
The important parameters describing the performance of a hydraulic machine are: P the power input, H the head produced across the machine and the efficiency, η. For a given geometrical design of the machine, the performance is characterized by the variables: H – the head increase across the machine ρ – the fluid density, ω – the angular velocity of the rotor, D – the diameter of the rotor, μ  – the fluid viscosity and Q – the flow rate; and both P and η are expressed through these variables. How many non-dimensional parameters are involved herein? Gravitational acceleration g has also to be considered necessarily?
What is the main drawback of the squeezer?
A rod of length L with uniform charge density $$\lambda $$ per unit length is in the XY-plane and rotating about Z-axis passing through one of its edge with an angularvelocity $$\overrightarrow \omega $$ as shown in the figure below. $$\left( {{\bf{\hat r}},\,\hat \phi ,\,{\bf{\hat z}}} \right)$$   refer to the unit vectors at Q, $$\overrightarrow {\bf{A}} $$ is the vector potential at a distance d from the origin O along Z-axis for d ≪ L and $$\overrightarrow {\bf{J}} $$ is the current density due to the motion of the rod. Which one of the following statements is correct?
Electromagnetic Theory mcq question image