In ________ riveting, the rivets in the adjacent rows are staggered and are placed in between those of the previous row.

In ________ riveting, the rivets in the adjacent rows are staggered and are placed in between those of the previous row. Correct Answer zigzag

In zigzag riveting, the rivets in the adjacent rows are staggered and are placed in between those of the previous row. Row pitch of zigzag riveting is 0.6 times the diagonal pitch.
Bissoy MCQ

Related Questions

If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
According to I.B.R., the distance between the rows of rivets, for equal number of rivets in more than one row for lap joint or butt joint (chain riveting) shall not be less than
If the rivets are used along a number of rows such that the rivets in the adjacent rows are placed directly opposite to each other, it is known as _________
If the number of rivets in each adjacent row goes on decreasing in subsequent rows towards edge, it is called _________ riveting.
If number of rivets subjected to single shear per pitch length is 2 and those subjected to double shear per pitch length are 3, then find the shear resistance of rivets is diameter of rivets is 20mm and permissible shear 60N/mm².
A triple riveted butt joint with double straps of unequal width is to be designed for a boiler shell. The pitch of the rivets in the outer row is double the pitch in the inner row and zigzag riveting is proposed. Which of the following statement is correct?
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². If width of plate=80mm and diameter of rivets 10mm, then pitch will be?
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along B-B.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along C-C.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the pitch of the rivets.