Bissoy.com
Doctors Medicines MCQs Q&A

The face angle of a bevel gear is equal to

The face angle of a bevel gear is equal to Correct Answer pitch angle + addendum angle

Face angle is the angle subtended by the face of the tooth at the cone centre. It is denoted by ‘φ’. The face angle is equal to the pitch angle plus addendum angle.

Related Questions

Consider the following statements: The axis of spiral bevel gear are non-parallel and intersecting. 1) The most common pressure angle for spiral bevel gear is 20° 2) The most common spiral angle for spiral bevel gear is 35. 3) Spirals bevel gears are generally interchangeable. 4) Spirals are noisy and recommended for low speeds of 10 m /s. Which of the above statements are correct?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
6 faces of a cube is painted with different colour. Red face is opposite to the black face. The face adjacent to the bottom face is white. Brown face is adjacent to blue face. Red face is at the bottom. Which face will be on exactly opposite to the brown face.
A, B, C, D, E and F are six girls who use 6 different face wash – Pond’s, Lakme, Lotus, Garnier, Himalaya and Kaya (but not necessarily in the same order). They also like six different colours – Red, Blue, Brown, Peach, Black and White (also not necessarily in the same order. A and C do not like a Red colour. The girl who uses Lakme face wash likes Peach colour. The girl who likes White colour does not use Kaya nor Lotus face wash. B neither likes Peach nor Red colour. D does not like a Blue colour but uses a Lotus face wash. The girl who uses Pond’s face wash likes Red colour. C does not use Lakme face wash nor likes white colour. F neither uses Himalaya nor Kaya face wash but likes Brown colour. Who does use Himalaya’s face wash?
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
If b denotes the face width and L denotes the cone distance for a bevel gear, then the bevel factor is written as
The face width of the bevel gear is 0.3 times the radius of pitch cone. Here the bevel factor must be
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the shaft angle for opposite hand of helix if helix angle of two gears are 20⁰ and 17⁰.
When bevel gears connect two shafts whose axes intersect at an angle greater than a right angle and one of the bevel gears has a pitch angle of 90°, then they are known as