In spite of large heat transfer coefficient in boiling liquids, fins are used advantageously when the entire surface is exposed to

In spite of large heat transfer coefficient in boiling liquids, fins are used advantageously when the entire surface is exposed to Correct Answer All modes of boiling

Here all modes of boiling i.e. film, transition and nucleate are of great importance.
Bissoy MCQ

Related Questions

In spite of large heat transfer co-efficients in boiling liquids, fins are used advantageously, where the entire surface is exposed to __________ boiling.
In spite of the large heat transfer coefficient in boiling liquids, fins are used advantageously when the entire surface is exposed to
Even though heat transfer co-efficients in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling.
An electronic semiconductor device generates 0.16 k J/hr of heat. To keep the surface temperature at the upper safe limit of 75 degree Celsius, it is desired that the heat generated should be dissipated to the surrounding environment which is at 30 degree Celsius. The task is accomplished by attaching aluminum fins, 0.5 square mm and 10 mm to the surface. Work out the number of fins if thermal conductivity of fin material is 690W/m K and the heat transfer coefficient is 45k J/square m hr K. Neglect the heat loss from the tip of the fin
A finned surface consists of root or base area of 1m2 and fin surface area of 2m2. The average heat transfer coefficient for finned surface is 20W/m2K effectiveness of fins provided is 0.75. If finned surface with surface with root or base temperature of 50°C is transferring heat to fluid of 30°C, then the rate of heat transfer without using fin is _______
Consider the following statements pertaining to heat transfer through fins (i) They must be arranged at right angles to the direction of flow of working fluid (ii) The temperature along the fin is variable and accordingly heat transfer rate varies along the fin elements (iii) Fins are equally effective irrespective whether they are on the hot side or cold side of the fluid (iv) Fins are made of materials that have thermal conductivity higher than that of wall Identify the correct statements
Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the
Experimental results indicate that the local heat transfer coefficient h g for flow over a flat plate with an extremely rough surface is approximated by the relation h x = a x -0.12 Where a is a constant coefficient and x is distance from the leading edge of the plate. What is the relation between this local heat transfer coefficient and the average heat transfer coefficient for a plate of length x?
A polished metal pipe 5 cm outside diameter and 370 K temperature at the outer surface is exposed to ambient conditions at 295 K temperature. The emissivity of the surface is 0.2 and the convection coefficient of heat transfer is 11.35 W/m2 degree. Calculate the overall coefficient of heat transfer by the combined mode of convection and radiation
Consider the following statements regarding nucleate boiling (i) The temperature of the surface is greater than the saturation temperature of the liquid (ii) Bubbles are created by the expansion of entrapped gas oil vapor at small cavities in the surface (iii) The temperature is greater than that in film boiling (iv) The heat transfer from the surface to the liquid is greater than that in the film boiling Which of these statements are correct?