The intensity of normal pressure between the friction lining and the brake drum at any point is proportional to square of the vertical distance from the pivot.

The intensity of normal pressure between the friction lining and the brake drum at any point is proportional to square of the vertical distance from the pivot. Correct Answer Proportional to vertical distance linearly

It is proportional to the vertical distance linearly.
Bissoy MCQ

Related Questions

A pivoted double block brake has a drum radius of 280mm with two shoes subtending an angle of 100⁰. Maximum pressure intensity is 0.5N/mm². If the width of friction lining is 90mm, find the reaction at pivot in horizontal direction. Assume coefficient of friction as 0.2.
What is the braking torque at leading shoe if resultant frictional force acts at a distance of 250 mm from the brake drum center, coefficient of friction between the shoe and the drum as 0.5, the free ends of the two shoes are pushed apart with a force of 300 N which is acting at a distance of 320 mm from anchor, and two shoes are anchored together 170 mm away from the brake drum center?
Drum X is 1/2 full of oil and drum Y, which has twice the capacity of drum X, is 2/3 full of oil. If all of the oil in drum X is poured into drum Y, then drum Y will be filled to what fraction of its capacity?
A pivoted double block brake has a drum radius of 280mm with two shoes subtending an angle of 100⁰. Maximum pressure intensity is 0.5N/mm². If the width of friction lining is 90mm, find the torque capacity f each shoe. Assume coefficient of friction as 0.2.
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. If point G is 4m to the north of Point H, then what is the distance between H and D?
A pivoted double block brake has a drum radius of 280mm with two shoes subtending an angle of 100⁰. Calculate the distance of pivot from axis of drum.
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?
A haulage rope winds on a drum of radius 500 mm, the free end being attached to a truck. The truck has a mass of 500 kg and is initially at rest. The drum is equivalent to a mass of 1250 kg with radius of gyration 450 mm. The rim speed of the drum is 0.75 m/s before the rope tightens. By considering the change in linear momentum of the truck and in the angular momentum of the drum, find the speed of the truck when the motion becomes steady.
The pressure intensity at an element on long shoe brake varies directly with the sin of the pressure angle of the element of friction lining.
As the car slows down, the brake shoe and steel drum continuously absorbs 25 W. Assume a total outside surface area of 0.1 m2 with a convective heat transfer coefficient of 10 W/Km2 to the air at 20°C. How hot does the outside brake and drum surface become when steady conditions are reached?