If a hollow steel tube is heated from a temperature of 25’C to 250’C then fid the expansion of tube if area of the cross section is 300mm²,length of tube=200mm and coefficient of thermal expansion is 10.8 x 10⁻⁶ per ⁰C.

If a hollow steel tube is heated from a temperature of 25’C to 250’C then fid the expansion of tube if area of the cross section is 300mm²,length of tube=200mm and coefficient of thermal expansion is 10.8 x 10⁻⁶ per ⁰C. Correct Answer 0.486mm

Expansion=ἀxlx∆T= 10.8 x 10⁻⁶ x 200 x 225=0.486mm.
Bissoy MCQ

Related Questions

A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin
A steel rod is heated from 25 to 250 degree celcius. Its coefficient of thermal expansion is 10-5 and E = 100 GN/m2. if the rod is free to expand, the thermal stress developed in it is:
An air cooled cylindrical wall is to be fitted with triangular fins of 3 cm thickness at base and 12 cm in height. The fins are made from stainless steel with density 8000 kg/m3 and thermal conductivity 17.5 W/m K. The wall temperature is 600 degree Celsius and the fin is exposed to an environment with t a = 30 degree Celsius and h = 20 W/m2 K. What is the temperature distribution along the fin? . b) t = 20 + 250 I 0 . c) t = 30 + 250 I 0 . d) t = 40 + 250 I 0 .
A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal expansion is 12 x10-6 per degree celcius. Calculate the thermal stress developed?
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
A large steel plate 50 mm thick is initially at a uniform temperature of 425 degree Celsius. It is suddenly exposed on both sides to an environment with convective coefficient 285 W/m2 K and temperature 65 degree Celsius. Determine the center line temperature. For steel, thermal conductivity = 42.5 W/m K and thermal diffusivity = 0.043 m2/hr
The channels 108.10, 108.15, 108.30, 108.35 and so on, are reserved for ILS in the US.
A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If αsteel = 0.000012/C°, Esteel = 0.2 MN/mm2, the tensile force developed at a temperature of 50°C, is
In a counter flow heat exchanger, water flowing through a tube of 10 cm inner diameter is heated by steam condensing on the outside of the tube. The convective film coefficient on the water and steam side are estimated to be 12000 and 20000 k J/m2 hr degree. Neglecting tube thickness and its resistance to heat flow, workout the overall heat transfer coefficient for the heat exchanger