Increasing volume concentration of abrasive in slurry would affect MRR in which of the following manner?

Increasing volume concentration of abrasive in slurry would affect MRR in which of the following manner? Correct Answer increase MRR

The concentration of abrasive grits in the slurry is related as follow n = (6AC)/ πdg2, where n= number of grits A= total surface area of the tool facing the workpiece C= concentration of abrasive grits in the slurry dg= diameter of a grit Thus above relation shows that any increase in ‘C’ will increase ‘n’ and hence material removal rate (MRR).
Bissoy MCQ

Related Questions

Manure slurry, a mixture of animal waste, organic matter, and sometimes water often known simply as “slurry” in agricultural use, used as fertilizer after ageing in a slurry pit.
If there is an increase in viscosity of slurry, what happens to MRR?
Profits can be increased by
1. decreasing the selling price per unit.
2. increasing the selling price per unit.
3. decreasing the volume of sales.
4. increasing the volume of sales.
5. decreasing the fixed or variable expenses.
6. increasing the fixed or variable expenses.
7. giving more weightage for products having higher P/V ratio.
8. giving less weightage for products having higher P/V ratio.
Select the correct answer
The concentration of oxygen at the inner surface of the vessel is maintained at a level C depending on the pressure in the vessel, while the concentration at the outer surface is reduced to zero by the escape of oxygen to the surroundings. A steady state will eventually be reached when the concentration everywhere reaches a constant value. Provided D is independent of concentration there will be a single concentration gradient in the wall and the thickness of the wall is L, the flux is given by________________
MRR increases with abrasive flow rate increase.
When compared to the conventional abrasive sawing, how many times faster is the MRR?
According to Griffith theory, which of the following are true for the fracture stress in a brittle material?
P. Increases with increasing surface energy
Q. Decreases with increasing elastic modulus
R. Decreases with increasing length of pre-existing crack
S. Decreases with increasing number of pre-existing cracks of same size
In precision investment casting, to make the mould the prepared pattern is dipped into a slurry. From which material is this slurry is made up of?
A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
In Soil slurry reactor, the slurry is thickened and dewatered using __________