Bissoy.com
Doctors Medicines MCQs Q&A

Vienna developed the method of wire bound reinforced concrete pipe by binding high tensile steel wires, the stresses in that were ranging in between ___________

Vienna developed the method of wire bound reinforced concrete pipe by binding high tensile steel wires, the stresses in that were ranging in between ___________ Correct Answer 160 to 800

Vienna in 1923, has developed a wire bound reinforced concrete pipe by binding high tensile steel wires on pipe and In this method it was noticed that the stresses of concrete was ranging in between 160 to 800 n/mm2.

Related Questions

In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
Four pipes P, Q, R and S are connected to a tank. Pipe P, Q, R and S can fill the whole tank in 300/37 minutes. Ratio of time taken by pipe P to fill the tank when operating alone and pipe Q to fill the tank when operating alone is 3 : 2, pipe Q is 20% more efficient then pipe R and time taken by pipe S is 10 minutes more than pipe R. Find difference between time taken by pipe Q and pipe P to fill up the tank alone. 
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
To fill the tank Pipe A and Pipe B takes 12hours. Pipe B and Pipe C takes 9 hours to fill the tank and Pipe C and Pipe A together take 15 hours to fill the tank. Find the time taken to fill the tank when Pipe A, Pipe B and Pipe C opened together(approximately).
A container of 425 liters was filled with chemicals through two pipes. The first pipe was kept open for 5 hours more than the second pipe. If the first pipe remains open for as long as the second pipe remains open, and the second pipe remains open for as long as the first pipe remains open, then the quantity of chemical filled by the first pipe was half the quantity of chemical filled by the second pipe. If both the pipes are opened simultaneously, the tank will be filled in 17 hours. For how long was the second pipe open?
Pipe A takes 10 hours more than Pipe B to fill a tank. Pipe C(which is equally efficient as Pipe A and Pipe B together), fills the same tank in 12 hours. In how many hours will Pipe A, Pipe B and Pipe C fill the tank if Pipe A is accompanied by B and C on alternate hours.
Pipe A is 40% more efficient then pipe E, Pipe B requires 4 minutes less to fill up the tank alone then pipe E, ratio of time taken by Pipe C and pipe A is 5 : 6, pipe C requires 15 minutes to empty the whole tank, if all the pipes are opened together then it requires 48/ 11 minutes to fill up the whole tank. Find the ratio of time taken by pipe B and pipe C to fill up the tank alone.
Permeability in concrete is studied towards providing for, or guarding against, which of the following features? 1. The penetration by materials in solution may adversely affect the durability of concrete; moreover, aggressive liquids 'attack' the concrete. 2. In the case of reinforced concrete, ingress of moisture and air will result in corrosion of steel leading to an increase in the volume of steel, resulting in cracking and swilling of the concrete cover. 3. The moisture penetration depends on permeability and if the concrete can become saturated with water it is less vulnerable to frost action.
In the question below, are given a statement followed by three courses of actions numbered I, II and III. On the basis of the information given, you have to assume everything in the statement to be true, and then decide which of the following suggested courses of actions logically follow(s) for pursuing. Statement: Specialty steel and wire ropes maker Usha Martin's decision to sell one of its core businesses - steelmaking - to prune outstanding debt, marks the rare instance of an Indian corporate borrower meeting its loan obligations through divestment. The slump sale is a milestone in the six-decade history of the Kolkata-based company, whose board on Saturday approved the divestment of its one million ton steel business in favor of Tata Steel for Rs 4,600 crore.  Courses of action: I. Proceeds will be used to ‘first repay existing lenders of the company’. Usha Martin will retain a profitable wire ropes unit as residual business, and has plans to scale it up significantly.  II. As part of the transaction, Usha Martin has entered into a five-year deal with The Tatas for sale of steel at market price to the wire-ropes business.  III. Usha Martin is among the top four wire rope players globally. With oil prices going up and strong trend in demand in Europe, the Ebitda in the wire-ropes business has improved.