Related Questions

Solution of nitrogen in liquid iron may be assumed to follow Sievert's law. Nitrogen content of liquid iron. at 1873K in equilibrium with 1 atm pressure of nitrogen is measured as 0.044 (mass %). What will be the equilibrium nitrogen content in liquid iron (mass%), if nitrogen pressure is reduced to 0.25 atm?
Before a battle the ratio of tanks to planes in an army was 5 : 3. During the war 1000 tanks were destroyed and 800 planes were destroyed. The ratio oftanks to planes became 2 : 1. What is the number of tanks after the war.
In order to prepare Lithium nitride, air is passed gently over a reactor. Suppose that Nitrogen diffuse to a length 5cm before getting reacted with Lithium. Nitrogen reacts with lithium quickly so that partial pressure of Nitrogen at that point is 0. Reactor is a cylinder of length 10cm and diameter 2cm. Assume air to be a mixture of Nitrogen and Oxygen only. The temperature is 298K and total pressure 1atm. Diffusivity of N2 in O2 is 2*10-5m2/s. Calculate the Molar flux (mol/m2.s) of N2 at a distance of 2.5cm from the top with respect to an observer moving with twice the mass average velocity a direction towards the liquid surface. (R=8.205*10-5m3atmK-1mol-1). Assume z=0 at the top of the reactor.
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate 10 Kg/min, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 100% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate 30 Kg/min the product formed contains 20% acetic acid, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
The total Nitrogen load = (soluble organic nitrogen and ammonia from incoming wastewater) + (nitrogen from Return Activated Sludge) + (nitrogen from recirculation).
The digested sludge from septic tanks, is removed after a maximum period of
Septic action is produced by the septic tank by __________