Related Questions

একটি পানিপূর্ণ কুয়ার গভীরতা 20m ও ব্যাস 2 m. কুয়াটিকে পানি শূণ্য করার জন্য 5 HP এর একটি পাম্প লাগানো হল। অর্ধেক পানি তোলার পর পাম্পটি নষ্ট হয়ে গেল। বাকি পানি তোলার জন্য একই ক্ষমতা সম্পন্ন আর একটি পাম্প লাগানো হল। প্রথম পাম্প দ্বারা সম্পাদিত কাজের পরিমান নির্ণয় কর।(The depth and diameter of a water filled well are 20 m and 2 m respectively. An engine of 5 HP is attached to pump out the water. The pump was ruined after emptying half of the water. Then another pump of same capacity was attached to pump out rest of the water. Determine the work done by first pump.) 
If the gear ratio for fuel pump is thrice that of the oxidizer pump, the shaft speed of fuel pump is ____________ the oxidizer pump.
Select differences between reference type and value type: i. Memory allocated to ‘Value type’ is from heap and reference type is from ‘System. ValueType’ ii. Memory allocated to ‘Value type’ is from ‘System. ValueType’ and reference type is from ‘Heap’ iii. Structures, enumerated types derived from ‘System. ValueType’ are created on stack, hence known as ValueType and all ‘classes’ are reference type because values are stored on heap
Working alone, pump A can empty a pool in 3 hours. Working alone, pump B can empty the same pool in 2 hours. Working together, how many minutes will it take pump A and pump B to empty the pool?
A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump
A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
A centrifugal pump is called a turbine pump, if it is having a
In Pelton turbine the ratio of volume available at shaft of turbine and power supplied at the inlet of the turbine is _______
The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?