Bissoy.com
Doctors Medicines MCQs Q&A

Eccentrically loaded columns have to be designed for combined axial and ________

Eccentrically loaded columns have to be designed for combined axial and ________ Correct Answer Bending moments

When the line of action of the resultant force doesn’t coincide with the axis of centre of gravity then it is called eccentrically loaded column. An eccentrically loaded column has to be designed for combined axial force and bending moments.

Related Questions

Consider the following for local capacity of section: 1. Local section failure is usually encountered in the case of short stocky beam-columns with relatively smaller axial compression ratio and beam-columns bent in reverse curvature. 2. The strength of end section reached under combined axial force and bending, governs the failure. 3. The strength of the section may be governed by plastic buckling of plate elements in the case of plastic, compact and semi-compact sections. Which of the above statements are correct?
Battening is preferable when thei) column carries axial load onlyii) space between the two main components is not very largeiii) column is eccentrically loaded The correct answer is
Battening is preferable when the
i) column carries axial load only
ii) space between the two main components is not very large
iii) column is eccentrically loaded
The correct answer is
The maximum harbour depth below lowest low water is generally equal to
(i) loaded draft + 1.2 m when bottom is rock
(ii) loaded draft + 1.8 m when bottom is soft
(iii) loaded draft + 1.2 m when bottom is soft
(iv) loaded draft + 1.8 m when bottom is rock
Eccentrically loaded structures have to be designed for _______
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
In case of eccentrically loaded struts __________ is preferred.
Which type of footing is recommended when the property line is so close to one column that a spread footing would be eccentrically loaded when kept entirely within the property line?
Which of the following statements are true about eccentrically loaded circular base?
Match the conditions under which the given type of footing is used:  a. Combined footing  I. For two or more columns  b. Mat foundation  II. For isolated or group of  columns  c. Pile foundation  III. For individual column  d. Isolated footing  IV. For supporting all  columns of structure