For the overhead RCC ___________ it should be seen that the permissible limits of stresses relating to resistance to cracking are not exceeded.

For the overhead RCC ___________ it should be seen that the permissible limits of stresses relating to resistance to cracking are not exceeded. Correct Answer Water tanks

The bottom slab of overhead water tank should be placed 1 metre above the roof slab. It will facilitate proper centring during construction and also for the location and repairing the leakage after construction.
Bissoy MCQ

Related Questions

What is the permissible limits for construction of chlorides in water for RCC work?
The maximum compressive stresses developed at the base of the dam should not exceed permissible ___________ stresses for masonry.
The maximum induced ___________ stresses should be within the safe permissible stresses to ensure strength of the beam.
Which of the following statements relating to the Trade Unions Act, 1926 are correct?
1. The act gives the definition of a trade union.
2. There is a provision in the act relating to decent work.
3. There is a provision in the act relating to the unfair labour practices.
4. There is a provision in the act relating to political fund.
Select the correct answer
Consider the given statement/s to be trueand decide which of the given conclusions/assumptionscan definitely be drawn from the given statement. Statements: Life means stresses and strains.
Stresses and strains have an adverse effect on life. Conclusions: I. Life is not worth living.
II. One should avoid stresses and strains in life.
A passage with three blanks,followed by five options, each containingone word, is given. Choose the word thatcan fill all the three blanks.
Emission ____________ are the legalrequirements governing air pollutantsreleased into the atmosphere. Emission___________ set quantitative limits onthe permissible amount of specific airpollutants that may be released fromspecific sources over specifictimeframes. They are generallydesigned to achieve air qualitystandards and to protect human life.Many emissions ____________ focus onregulating pollutants released byautomobiles (motor cars) and otherpowered vehicles. Others regulateemissions from industry, power plants,small equipment such as lawn mowersand diesel generators, and other sourcesof air pollution. While this have beenused to dictate limits for conventionalpollutants such as oxides of nitrogen andoxides of sulphur (NOx and SOx), thisregulatory technique may be used toregulate greenhouse gasses, particularlycarbon dioxide (CO2). In the US, this isgiven in pounds of carbon dioxide permegawatt-hour (lbs. CO2/MWhr), andkilograms CO2/MWhr elsewhere.
Find the Permissible stresses and range of stresses for class 1 structure fcu = 50n/mm2, fck = 35n/mm2 according to BS: 8110 recommendations for fcu = 50n/mm2 and fci = 35n/mm2,fct = 0.5fci = 17.5n/mm2?
Calculate Permissible stresses compressive stresses in concrete at transfer and working loads, as recommended given fct = 15n/mm2, fst = 0.8, fcw is 12n/mm2?
A cubic shape body is subjected to stresses as shown in the figure below. If both are stresses are equal in magnitude, calculate the shear stresses on black and green planes.
In case of ________ it is seen that the allowable bearing pressure on the soil is not exceeded, even under the worst conditions.