The space between two plates (20cm*20cm*1cm), 1 cm apart, is filled with a liquid of viscosity 1 Poise. The upper plate is dragged to the right with a force of 5N keeping the lower plate stationary. What will be the velocity in m/s of flow at a point 0.5 cm below the lower surface of the upper plate if linear velocity profile is assumed for the flow?

The space between two plates (20cm*20cm*1cm), 1 cm apart, is filled with a liquid of viscosity 1 Poise. The upper plate is dragged to the right with a force of 5N keeping the lower plate stationary. What will be the velocity in m/s of flow at a point 0.5 cm below the lower surface of the upper plate if linear velocity profile is assumed for the flow? Correct Answer 12.5

where Fν = viscous force, A = area, du ⁄ dx = velocity gradient, μ = co-effcient of viscosity. If linear velocity profile is assumed, du⁄dx = U/x, where U = velocity of the upper plate and x = distance between the two plates. Now, the viscous force Fv = -F= -5N. Substituting all the values in the equation, U becomes 12.5 m/s.
Bissoy MCQ

Related Questions

Water flows between two plates of which the upper one is stationary and the lower one is moving with a velocity V. What will be the velocity of the fluid in contact with the upper plate?
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. If point G is 4m to the north of Point H, then what is the distance between H and D?
If the equation of a velocity profile over a plate is v = 5y2 + y (where v is the velocity in m/s) determine the shear stress at y = 0. Given the viscosity of the liquid is 8.35 poise.
The viscosity of a fluid in motion is 1 Poise. What will be it’s viscosity (in Poise) when the fluid is at rest?
A large tank of height h is half-filled with a liquid of density ρ and other half-filled with a liquid of density 4ρ. A similar tank is half-filled with a liquid of density 2ρ and other-half filled with another liquid of density 3ρ as shown. What will be the ratio of the instantaneous velocities of discharge through a small opening at the base of the tanks? (assume that the diameter of the opening is negligible compared to the height of the liquid column in either of the tanks)
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?
Angled baffles are preferred in the agitation tank to control the swirling action; if the viscosity of the liquid to be mixed is about 200 poise. However, the baffle may be completely eliminated for mixing liquids having viscoisty above __________ poise.
A man starts from point 'O', travels 20 km towards east to reach point 'A', turns right and travels 10 km to reach point 'B', turns right and travels 9 km to reach point 'C', turns right and travels 5 km to reach point 'D', turns left and travels 12 km to reach point 'E' and then turns right and travels 6 km to reach point 'F'. What is the shortest distance between point 'E' and point 'C'?
The velocity distribution for fluid flow over a flat plate is given by u=2y-6y2 in which u is the velocity in metre per second at a distance of y metre above the plate. Determine the shear stress at y=0.15m.Take dynamic viscosity of fluid as 8.6 poise.
A parallel-plate capacitor of capacitance C1is made using two gold plates. Another parallel-plate capacitor of capacitance C2is made using two aluminium plates with same plate separation, and all the four plates are of same area. If gand aPare respectively the electrical resistivities of gold and aluminium, then which one of the following relations is correct?