Bissoy.com
Doctors Medicines MCQs Q&A

3-phase transformers compare to 1-phase transformers ________

3-phase transformers compare to 1-phase transformers ________ Correct Answer More economical

3-phase transformers are also used to power large motors and other heavy loads. A three-wire three-phase circuit is more economical than an equivalent two-wire single-phase circuit at the same line to ground voltage because it uses less conductor material to transmit a given amount of electrical power.

Related Questions

Which among the following is/are most appropriate for introducing the topic "comparison of size of different objects" in class I : a: Observe different objects and compare. b: Measure using non-standard units and compare. c: Measure using standard units and compare. d: Superimpose the objects and compare.
Consider the following statements regarding parallel connection of 3-phase transformers: 1. The secondaries of all transformers must have the same phase sequence. 2. The phase displacement between primary and secondary line voltages must be the same for all transformers which are to be operated in parallel. 3. The primaries of all transformers must have the same magnitude of line voltage. Which of the above statements are correct?
A load of R = 60 Ω is fed from 1phase, 230 V, 50 Hz supply through a step-up transformer & than a diode. The transformer turns ratio = 2. The power delivered to the load is
Which type of winding is used in 3phase shell-type transformer?
Consider the following given statements about auto-transformers and choose the one which is/are correct. 1. Auto-transformers require less copper as compared to a conventional,2 winding transformer of the same capacity. 2. Auto-transformers provide isolation between the primary and secondary windings. 3. Auto- transformer has less leakage reactance as compared to the conventional, 2 winding transformer of the same capacity.
After using for some time, big transformers get heated up. This is due to the fact that
1. current produces heat in the transformers.
2. hysteresis loss occurs in the transformers.
3. liquid used for cooling gets heated.
Select the correct answer:
P does half work as compare to Q. R does half work as compare P and Q together. If R alone can finish it in 40 days, then all of them together will finish the work in how many days?
The best way to compare the different implementations of symbol table is to compare the time required to ____________
The capture/compare registers TBCCRn are double-buffered when used for compare events?
While working with MS-DOS, which command is used to compare the disk in drive A with the disk in drive B, specifying to compare only first side of each disk, and only the first 8 sectors of each track?