Which converter/s can be used for DC series motor control?

Which converter/s can be used for DC series motor control? Correct Answer Semi converters and full converter

Semi-converters and full-converters are also employed for control of a DC series motor. The total circuit inductance is high because of the series field, as a consequence of which the armature current is mostly continuous.
Bissoy MCQ

Related Questions

Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
Catalytic converters are called three-way converters because they are used to reduce the concentration of CO. HC, and NOx in the exhaust.
In FACTS line commutated converters are generally preferred than self-commutated converters.
Examine the following statements about span of control and identify the ones which are true?
1. More task complexity requires narrower span of control.
2. Routine tasks can have greater span of control than exceptional tasks.
3. When tasks are dissimilar, then span of control can be larger.
4. Spans of control are generally narrower at the top and broader at the bottom of the hierarchy.
A centrifugal pump which circulates a hot liquid metal at 500 degree Celsius is driven by a 3600 rpm electric motor. The motor is coupled to the pump impeller by a horizontal steel shaft of dia 25 mm. Let us assume the motor temperature as 60 degree Celsius with the ambient air at 25 degree Celsius, what length of shaft should be specified between the motor and the pump? It may be presumed that the thermal conductivity of the shaft material is 35W/m K and that the convective film coefficient between the steel shaft and the ambient air is 15.7W/square m K
For the given traction application using a dc series motor for a starting time ’t’ is applied. If this method is replaced by a series-parallel control, giving 50% time for each series and parallel. The saving in the starting energy of _________
For the given traction application using a dc series motor for a starting time ’t’ is applied. If this method is replaced by a series-parallel control, giving 50% time for each series and parallel. The saving in the starting energy of ____________
Half wave converters are used for controlling DC motor of ________________
By looking at which part of the motor, it can be easily confirmed that a particular motor is D.C. motor?
Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be