In which mode machine is operating, given that conductor current is in the same direction of conductor emf?

In which mode machine is operating, given that conductor current is in the same direction of conductor emf? Correct Answer Generating

If the conductor current is in the same direction of conductor emf then machine outputs electrical power and absorbs mechanical power. So, when mechanical power is absorbed machine is said to be in a generating mode. When conductor emf and conductor current are in opposite directions then machine is said to be in a motoring mode.
Bissoy MCQ

Related Questions

The conductor EMF and current are in _____ direction and developed torque is in _____ for generating mode.
Which of the following is a correct method to calculate the EMF of a galvanic cell? + b) Standard EMF of the cell = – c) E°cell = E°cathode – E°anode d) Standard EMF of the cell = +
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 3-phase induction machine is operating on 3-phase fixed frequency ac mains at a per unit slip of 1.5. Then machine is operating in generating mode.
The operating point for an over excited alternator working near zpf lagging power factor gives ‘A’ as the operating point. Then if the same machine is working as an over excited synchronous motor will give same operating point at __________
If the intensity of the magnetic field perpendicular to current carrying conductor is 100T, the length of the conductor is 3m and the current in the conductor is 10A, calculate the magnitude of force perpendicular to the electric field.
The relation between the direction of induced emf and the direction of motion of the conductor is?
The grain direction is known as the machine direction (MD), while the cross direction (CD) is the direction of the paper at right angles to the MD.
When the length of the conductor in the current carrying conductor increases, what happens to the force in the conductor which is at right angles to the magnetic field?
Which three statements are true about the operation of a full-duplex Ethernet network?
1. There are no collisions in full-duplex mode.
2. A dedicated switch port is required for each full-duplex node.
3. Ethernet hub ports are preconfigured for full-duplex mode.
4. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
5. The host network card and the switch port must be capable of operating in full-duplex mode.