Related Questions

Indifference curves relating to supply of labour have a number of properties some of which are mentioned below
1. Indifference curves are downward slopping
2. Indifference curves are upward slopping
3. Higher indifference curves indicate lower levels of utility
4. Higher indifference curves indicate higher levels of utility
5. Indifference curves do not intersect
6. Indifference curves intersect
7. Indifference curves are concave to the origin
8. Indifference curves are convex to the origin
Which among the following properties are not true?
From the OCC and SCC curves, what does the intercept AB represent?
OCC is drawn at two different speeds both less than rated speed. OCC drawn at speed N1 lies below OCC drawn at speed N2. Which of the following relation is correct?
In a coherent cascade network, if the third order intercept point of an amplifier is 158 mW and the third order intercept point of a mixer is 5 mW, with an insertion loss of 6 dB, then the third order intercept point of the coherent cascade is:
In a non coherent cascade network, if the third order intercept point of an amplifier is 158 mW and the third order intercept point of a mixer is 5 mW, with an insertion loss of 6 dB, then the third order intercept point of the coherent cascade is:
If suppose OCC is conducted at speed n1, where n1< nrated, OCC will lie ____________
From the figure shown below for the OCC and SCC of a three phase alternator, the point ‘L’ corresponds to _______ and the point ‘A’ can be obtained by _____ the alternator.
Read the following statements:
(1) The Supreme Court in N. Balakrishnan v. M. Krishnamurthy, (1998) 7 SCC 123 refuse to condone the delay on the ground of sufficient cause
(2) In the case of R. B. Ramalingum v. R. B. Bhuwaneshwari, (2009) 2 SCC 689, the Supreme Court observed that the test of sufficient cause is purely an individuals test of the above:
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Assertion (A): If the monopolist faces identical demand curves for his commodity in two separate markets, by practising third degree price discrimination, he cannot increase his TR and total profits.
Reason (R): As the marginal revenue curves are identical when the demand curves in the two markets are the same, the monopolist will not charge different prices in each market to maximise profits.