A single phase full bridge inverter has load R = 2 Ω, and dc voltage source Vs = 230 V. Find the rms value of the fundamental load current.

A single phase full bridge inverter has load R = 2 Ω, and dc voltage source Vs = 230 V. Find the rms value of the fundamental load current. Correct Answer 103 A

The fundamental component of voltage = (4Vs/π) sinωt. Peak value Vm = 4Vs/π Rms voltage = 4Vs/π√2 = 207 V Current = 207/2 = 103.5 A.
Bissoy MCQ

Related Questions

A single phase full bridge inverter has RLC load with R = 4 Ω, L = 35 mH and C = 155 μF. The dc input voltage is 230 V and the output frequency is 50 Hz. Find the rms value of the fundamental load current.
A single phase full bridge inverter is fed from a dc source such that the fundamental component of output voltage = 230 V. Find the rms value of SCR and diode current respectively, for a R load of 2 Ω.
A single phase full bridge inverter has a dc voltage source Vs = 230 V. Find the rms value of the fundamental component of output voltage.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from AC source to the DC load. Consider E = 120 V, R = 0.4 Ω.
A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from the DC load to the AC source. Consider E = 120 V, R = 0.4 Ω, L = 2 Henry.
A single phase full bridge inverter circuit, has load R = 2 Ω and dc source Vs = 230 V. Find the value of power delivered to the load in watts only due to the fundamental component of the load current.
A single-phase bridge inverter, fed from a 230 V dc is connected to the load R = 10 Ω and L = 0.03 H. Determine the fundamental component of rms output current. Fundamental output frequency of the square wave output = 50 Hz.
A single phase half bridge inverter has load R = 2 Ω and a dc voltage source Vs/2 = 115 V. Find the rms value of the fundamental load current.
A single phase full bridge inverter has RLC load with R = 4 Ω, Xl = 11 Ω and Xc = 20.54 Ω. The dc input voltage is 230 V. Find the value of fundamental load power.
A single-phase bridge inverter, fed from a 230 V dc is connected to the load R = 10 Ω and L = 0.03 H. The output is a quasi-square wave with an on period of 0.5 of a cycle. Determine the fundamental component of rms output voltage.