The type of commutation when the load is commutated by transferring its load current to another incoming thyristor is

The type of commutation when the load is commutated by transferring its load current to another incoming thyristor is Correct Answer class C or complementary commutation

In the Class C type commutation also called as complementary commutation the load is commutated by transferring the current th another device.
Bissoy MCQ

Related Questions

Which of the following is false for a Thyristor? A. Thyristor is a majority carrier device B. The forward-bias portion of Thyristor’s i-v characteristics has two stable operating regions. C. The forward-bias portion of Thyristor’s i-v characteristics has one stable operating region. D. The negative gate current turns off the thyristor.
In a McMurray inverter, diodes are connected in inverse parallel to thyristors to 1. Protect the thyristor 2. Make the turn off of the thyristor successful 3. Make the turn on of the thyristor successful 4. Provide path to the reactive component of the load current Which of the above statements are correct?
If in the DC machine, the reversal of current in the coil is faster than ideal or linear commutation then the commutation is said to be __________ commutation.
A DC supply of 100 V feeds an inductance of 10 H through a thyristor. What is the minimum width of the gate pulse so that the thyristor is triggered, if the latching current of thyristor is 80 mA ? 
In case of class B commutation or resonant-pulse commutation with L = 5 μH and C = 20 μC with the initial voltage across the capacitor (Vs) = 230 V. Find the conduction time for auxiliary thyristor.
In case of class A type commutation or load commutation with low value of R load the
A voltage commutated chopper has the following parameters: Vs = 220 V. Commutation circuit: L = 20 μH and C = 50 μF. Find the effective on period for a constant load current of 80 A and Ton = 800 μsecs.
A voltage commutated chopper has the following parameters: Vs = 220 V. Commutation circuit: L = 20 μH and C = 50 μF. Find the turn-off time for the main SCR with a constant load current of 80 A and Ton = 800 μsecs.
What is the expression for design of commutation capacitance in case of a load commutated chopper circuit?
The expression for the thyristor (chopper switch) current is given by I = (α2.Vs – αE)/R Find the value of firing angle α, for which the thyristor current is maximum.