Related Questions

Arrange in the correct sequence from the lowest to the highest scale of measurement.
1. Interval scale
2. Ordinal scale
3. Ratio scale
4. Nominal scale
Determine the full scale range for the input voltage if the resistance in series with meters are 1kΩ, 2kΩ, 47kΩ and full scale meter movement is 1mA in low voltage AC voltmeter?
The digitization process i.e. the digital image has M rows and N columns, requires decisions about values for M, N, and for the number, L, of max gray levels is an integer power of 2 i.e. L = 2k, allowed for each pixel. If we assume that the discrete levels are equally spaced and that they are integers then they are in the interval __________ and Sometimes the range of values spanned by the gray scale is called the ________ of an image. and static range respectively b) and dynamic range respectively c) and static range respectively d) and dynamic range respectively
A high contrast image and a dark image will have what kind of histogram respectively, when the histogram, h(rk) = nk, rk the kth gray level and nk total pixels with gray level rk, is plotted nk versus rk? The histogram that are concentrated on the dark side of gray scale. The histogram whose component are biased toward high side of gray scale. The histogram that is narrow and centered toward the middle of gray scale. The histogram that covers wide range of gray scale and the distribution of pixel is approximately uniform.
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam­ powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale­ model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full­ scale, self ­propelled mechanical vehicle or automobile in about 1769; he also created a steam­ powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam ­powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam ­powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. The first full­scale, working steam ­powered tricycle was built by:
Which three statements are true about the operation of a full-duplex Ethernet network?
1. There are no collisions in full-duplex mode.
2. A dedicated switch port is required for each full-duplex node.
3. Ethernet hub ports are preconfigured for full-duplex mode.
4. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
5. The host network card and the switch port must be capable of operating in full-duplex mode.
Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market
Determine the maximum value of output current of the DAC in MC1408?
A multiplying DAC is given a reference voltage VR = Vom cos2πft. Determine the output voltage?
The basic step of a 8-bit DAC is 12.4mv.If the binary input 00000000 represents 0v. Determine the output, if the input is 101101111?