The detector used in a high voltage Schering bridge is _________

The detector used in a high voltage Schering bridge is _________ Correct Answer vibration galvanometer

A high voltage Schering bridge is used for the measurement of low capacitance values at high voltages. A vibration galvanometer is used as a detector in a high voltage Schering bridge.
Bissoy MCQ

Related Questions

Detector is very sensitive in a high voltage Schering bridge.
A cow was standing on a bridge, 5m away from the middle of the bridge. A train was coming towards the bridge from the ends nearest to the cow. Seeing this cow ran towards the the train and managed to escape when the train was 2m away from bridge. If it had run in the opposite direction, it would hit by the train 2m before the end of the bridge. What is the lenght of the bridge in meters assuming the speed of the train is 4 times that of cow ?
In a Schering bridge the potential of the detector above earth potential is
Consider a binary digital communication system with equally likely 0's and 1's. When binary 0 is transmitted the detector input can lie between the levels -0.25V and +0.25V with equal probability: when binary 1 is transmitted, the voltage at the detector can have any value between 0 and 1 V with equal probability. If the detector has a threshold of 0.2 V (i.e., if the received signal is greater than 0.2 V, the bit is taken as 1), the average bit error probability is
Schering bridge is a DC (Direct current) bridge.
Schering bridge is used for _________
Power factor of a Schering bridge is _________
A Schering bridge can be used for the ______________
Schering bridge is one of the most widely used AC bridges.
Commercial Schering bridge can be used for the measurement of capacitances from _____________