If fp is the bandwidth of the differentiator, then the desired frequency characteristic should be linear in the range of _____________

If fp is the bandwidth of the differentiator, then the desired frequency characteristic should be linear in the range of _____________ Correct Answer 0 ≤ ω ≤ 2πfp

In most cases of practical interest, the desired frequency response characteristic need only be linear over the limited frequency range 0 ≤ ω ≤ 2πfp, where fp is the bandwidth of the differentiator.
Bissoy MCQ

Related Questions

Select the order in which the frequency should be maintained to enhance the stability of differentiator? Where fa -> Frequency at which gain =0 ; fb -> Gain limit frequency ; fc -> Unity gain bandwidth.
What is the desired response of the differentiator in the frequency range 2πfp ≤ ω ≤ π?
The plot S11 v/s frequency for a branch-line coupler has a straight line characteristic for a wide range of frequency around the designed frequency range.
In a frequency selective fading, mobile radio channel possess a constant gain and a linear phase over bandwidth smaller than bandwidth of transmitted signal.
How is the frequency response of an ideal differentiator related to the frequency?
Which of the following is the preferred metric when the desired signal bandwidth is less than Nyquist bandwidth?
Workstations connected to a port on a modern lOBase-T Ethernet HUB all use the same bandwidth, i.e. the bandwidth is shared across all available ports, the less ports, the less bandwidth available per port
The digitization process i.e. the digital image has M rows and N columns, requires decisions about values for M, N, and for the number, L, of max gray levels is an integer power of 2 i.e. L = 2k, allowed for each pixel. If we assume that the discrete levels are equally spaced and that they are integers then they are in the interval __________ and Sometimes the range of values spanned by the gray scale is called the ________ of an image. and static range respectively b) and dynamic range respectively c) and static range respectively d) and dynamic range respectively
If fl and fu are the cutoff frequencies, then what is the desired real valued frequency response of a Hilbert transform filter in the frequency range 2π fl u?
It is desired to design a frequency oscillator at 2.4 GHz and the reflection coefficient desired is 0.6, then the coupling coefficient between the feed line and the dielectric resonator is: