One of the advantages of the solid lubricants is ___________

One of the advantages of the solid lubricants is ___________ Correct Answer permit equipment is simple

The permit equipment is simple so that it can be carried anywhere very easily. Normally, the coefficient of friction of the solid lubricant is low and it is a disadvantage. Another disadvantage is it is unstable in radiation.
Bissoy MCQ

Related Questions

Consider a given volume of liquid at a temperature T below Tm with a free energy G’. If some of the atoms of the liquid cluster together to form a small sphere of solid, the free energy of the system will change to G, given by________ (Assume V1 volume of the solid sphere, V2 volume of liquid, A is the solid/liquid interfacial area, γ solid/liquid interface free energy, G1 and G2 are the free energies per unit volume of solid and liquid respectively).
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
Mobility of the solid lubricants on the adsorbents promotes ___________
The use of Third Country Nationals (TCNs) provides a number of advantages. Which of the following is not one of these advantages?
In solid lubricants, the _________ will be low.
Which of the following are the disadvantages of solid lubricants?
What is the range of coefficient of friction for solid lubricants?
The advantages of combinations are
1. elimination of inter-firm competition.
2. ensuring smooth continuous supply of raw materials.
3. saving on middle men's margins.
4. ensuring larger control over the market.
Of the advantages given above, which ones are applicable to horizontal combinations?
The temperature dependence of the electrical conductivity σ of two intrinsic semiconductors A and B is shown in the figure. If EA and EB are the band gaps of A and B respectively, which one of the following is true?
Solid State Physics mcq question image
Variation of electrical resistivity $$\rho $$ with temperature T of three solids is sketched (on different scales) in the figure, as curves P, Q and R.
Which one of the following statements describes the variations most appropriately?
Solid State Physics mcq question image