Related Questions

For a perfect gas, according to Boyle’s law (where p = Absolute pressure, v = Volume and T = Absolute temperature)
A $$\frac{{\text{v}}}{{\text{T}}}$$ = constant, if p is kept constant
B pv = constant, if T is kept constant
C $$\frac{{\text{T}}}{{\text{p}}}$$ = constant, if v is kept constant
D $$\frac{{\text{p}}}{{\text{T}}}$$ = constant, if v is kept constant
The absolute entropy for all crystalline substances at absolute zero temperature is
A Zero
B Negative
C More than zero
D Indeterminate
One poise (unit of absolute/dynamic viscosity) is equivalent to one
A gm/cm2.sec
B gm/cm.sec
C cm2/sec
D m2/sec
The price per unit of a product increases by 25% . The actual Taka increase in the unit price is Tk.1.25. What was the unit price in Taka before the price increase?
A 5
B 7.5
C 6.25
D 8.75
The price per unit of product increased by 25% The actual taka increase in the unit price was Tk. 1.25. What was the unit price in Taka, before the price increase?
A 5.00
B 6.25
C 7.50
D 8.75
The price per unit of product increased by 25% The actual taka increase in the unit price was Tk. 1.25. What was the unit price in Taka , before the price increase?
A 5.00
B 6.25
C 7.50
D 8.75
Based on the information below, how much did a certain telephone call cost? 1. The call lasted 1 minute 27 seconds 2. The cost for the first 30 second unit is Tk. 1.80, call duration more than 30 seconds costs Tk. 0.90 per 30 second unit 3. Any call duration less than 30 seconds is rounded up to the nearest 30-second unit.
A Tk. 1.80
B Tk. 2.61
C Tk. 2.70
D Tk. 3.51
Heat conducted through per unit area and unit thick face per unit time when temperature difference between opposite faces is unity, is called
A Thermal resistance
B Thermal coefficient
C Temperature gradient
D Thermal conductivity
Which of the following system program forgoes the production of object code to generate absolute machine code and load it into the physical main storage location from which it will be executed immediately upon completion of the assembly?
A Two pass assembler
B Load and go assembler
C Macro processor
D Linker
Which of the following cannot be the value of absolute pressure of a fluid at any point?
A 1.013 bar
B -1 bar
C 200 bar

Next steps