Squeeze Casting MCQ

Test your knowledge with important Squeeze Casting MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30 + more Squeeze Casting MCQs at Bissoy

• In squeeze casting, die preheating temperature is maintained within close limits and very precise.
  ক

  True

  খ

  False
• Extension of holding time of casting under the punch leads to more strength of the castings.
  ক

  True

  খ

  False
• Which of the following factors is not considered for the determination of pressure level in the squeeze casting?
  ক

  Shape of the casting

  খ

  Fluidity of the alloy

  গ

  Freezing range of alloy

  ঘ

  Moulding material
• An intermediate feeding component takes part in the in-direct type of squeeze casting.
  ক

  True

  খ

  False
• In squeeze casting, the instant contact between the melt and the die results into the formation of ductile castings of coarse structure due to slow rate of cooling.
  ক

  True

  খ

  False
• Which of the following methods of casting is also known as the liquid metal forging?
  ক

  Die casting

  খ

  Continuous casting

  গ

  Permanent mould casting

  ঘ

  Squeeze casting
• The method of squeeze casting is very expensive to use because of its less productivity.
  ক

  True

  খ

  False
• Shrinkage cavities cannot be reduced by application of pressure; it can only be avoided by having a tight seal in the casting system.
  ক

  True

  খ

  False
• At the starting of the casting process, the punch should be lowered down in such a way to form a tight seal.
  ক

  True

  খ

  False
• What should be the range of pressure (in MP
  ক

  under which molten metal is pressed to form the castings by squeeze casting method? ] 10 to 50

  খ

  50 to 140

  গ

  140 to 240

  ঘ

  240 to 300
• In the squeeze casting method, extreme care is taken while pouring of molten metal into the die cavity.
  ক

  True

  খ

  False
• The main purpose of squeeze casting is to produce castings of large volume with high segregation.
  ক

  True

  খ

  False
• The cooling rate is increased by applying high pressure in the squeeze die casting process.
  ক

  True

  খ

  False
• Porosities are eliminated in the squeeze die casting process.
  ক

  True

  খ

  False
• Squeeze casting is a combination of casting and forging.
  ক

  True

  খ

  False
• _____________ is the advantage of the squeeze casting process.
  ক

  Weld-able

  খ

  No Blow Holes

  গ

  Heat treatable

  ঘ

  All of the mentioned
• ________ squeeze casting takes place in die casting equipment.
  ক

  Direct

  খ

  Indirect

  গ

  Room temperature

  ঘ

  None of the mentioned
• Direct squeeze casting process is similar to the forging process.
  ক

  True

  খ

  False
• Pressure incorporated in the direct die casting is _____________
  ক

  High

  খ

  Low

  গ

  Not used

  ঘ

  Room temperature
• Pressure applied in the squeeze casting process is less than that of forging.
  ক

  True

  খ

  False
• Squeeze casting is used for manufacturing of components of _________
  ক

  Aluminum alloys

  খ

  Iron alloys

  গ

  Chromium alloys

  ঘ

  Carbon alloys
• The squeeze casting can result in an increase of _________ properties of the castings.
  ক

  Thermal

  খ

  Mechanical

  গ

  Thermodynamic

  ঘ

  Chemical