Law of Gearing MCQ

Test your knowledge with important Law of Gearing MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Law of Gearing MCQs on Bissoy. Bissoy App

• If the annular wheel of an epicyclic gear train has 100 teeth and the planet wheel has 20 teeth, the number of teeth on sun wheel is
  ক

  80

  খ

  60

  গ

  40

  ঘ

  20
• When two spur gears having involute profiles on their teeth engage, the line of action is tangential to the
  ক

  pitch circles

  খ

  dedendum circles

  গ

  addendum circles

  ঘ

  base circles
• In a reverted gear train, two gears P and Q are meshing, Q-R is a compound gear, and R and S are meshing. The modules of P and R are 4 mm and 5 mm respectively. The numbers of teeth in P, Q and r are 20, 40 and 25 respectively. The number of teeth in S is
  ক

  23

  খ

  35

  গ

  50

  ঘ

  53
• Consider the following modifications regarding avoiding the interference between gears: 1. The centre distance between meshing gears be increased 2. Addendum of the gear be modified 3. Teeth should be undercut slightly at the root 4. Pressure angle should be increased 5. Circular pitch be increased Which of these are effective in avoiding interference?
  ক

  1,2 and 3

  খ

  2,3,4 and 5

  গ

  1,4 and 5

  ঘ

  3,4 and 5
• When a pair of spur gears of the same material is in mesh, the design is based on pinion.
  ক

  True

  খ

  False
• An involute rack with 200 pressure angle meshes with a pinion of 14.50 pressure angle.
  ক

  True

  খ

  False
• Consider the following statements: A 200 stub tooth system is generally preferred in spur gears as it results in 1. stronger teeth 2. lesser number of teeth on the pinion 3. lesser chances of surface fatigue failure 4. reduction of interference Which of the above statements are correct?
  ক

  1,2 and 4

  খ

  3 and 4

  গ

  1 and 3

  ঘ

  1,2,3 and 4
• The dynamic load on a gear is due to 1. inaccurancies of tooth spacing 2. irregularities in tooth profile 3. deflection of the teeth under load 4. type of service Which of the above statements are correct?
  ক

  1,2 and 3

  খ

  2,3 and 4

  গ

  1,3 and 4

  ঘ

  1,2 and 4
• Consider the following statements in case of reverted gear train: 1. The direction of rotation of the first and the last gear is the same. 2. the direction of rotation of the first and the last gear is opposite. 3. The first and the last gears are on the same shaft. 4. The first and the last gears are on separate but co-axial shafts. Which of these statements is/are correct?
  ক

  1 and 3

  খ

  2 and 3

  গ

  2 and 4

  ঘ

  4 alone
• A side and face cutter 125 mm diameter has 10 teeth. It operates at a cutting speed of 14 m/min with a table traverse 100 mm/min. The feed per tooth of the cutter is
  ক

  10 mm

  খ

  2.86 mm

  গ

  0.286 mm

  ঘ

  0.8 mm