Dielectric Heating MCQ

Test your knowledge with important Dielectric Heating MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30 + more Dielectric Heating MCQs at Bissoy

• A slab of insulating material of thickness 6 cm and thermal conductivity 1.4kJ/m hr deg is placed between and is in contact with two parallel electrodes, and is then subjected to high frequency dielectric heating at a uniform rate of 140,000kJ/m3 hr. At steady state coefficients of combined radiation and convection are 42 and 48 kJ/m2 hr deg. If atmospheric temperature is 25 degree Celsius, find surface temperatures?
  ক

  144.10 degree Celsius and 134.47 degree Celsius

  খ

  123.50 degree Celsius and 154.34 degree Celsius

  গ

  121.60 degree Celsius and 115.45 degree Celsius

  ঘ

  165.40 degree Celsius and 165.45 degree Celsius
• The given expression can be used to solve the electrode temperature t w1 and t w2 q g δ = h 1 α 1 + h 2 α 2 Where, α 1 = A (t w 2 – t
  ক

  and α 2 = (t w1 – t ]. ] True

  খ

  False
• Dielectric heating apparatus consists of
  ক

  4 electrodes

  খ

  Elemental strip

  গ

  No Insulating material

  ঘ

  4 plates
• What maximum thickness of concrete can be poured without causing the temperature gradient to exceed 98.5 degree Celsius per meter anywhere in the slab? Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m3. Workout the maximum temperature of concrete
  ক

  2.64 m

  খ

  3.64 m

  গ

  4.64 m

  ঘ

  5.64 m
• Unit of specific resistance is
  ক

  Ohm mm2/m

  খ

  Ohm mm

  গ

  Ohm/m

  ঘ

  Ohm mm/m
• A composite slab consists of 5 cm thick layer of steel (k = 146 kJ/m hr degree) on the left side and a 6 cm thick layer of brass (k = 276 kJ/m hr degree) on the right hand side. The outer surfaces of the steel and brass are maintained at 100 degree Celsius and 50 degree Celsius. The contact between the two slabs is perfect and heat is generated at the rate of 4.2 * 10 5 k J/m2 hr at the plane of contact. The heat thus generated is dissipated from both sides of composite slab for steady state conditions. Calculate the temperature at the interface
  ক

  115.26 degree celsius

  খ

  125.26 degree celsius

  গ

  135.26 degree celsius

  ঘ

  145.26 degree celsius
• The insulating material used in dielectric heating is
  ক

  Coal

  খ

  Silver

  গ

  Coin

  ঘ

  Wool
• Consider a 1.2 m thick slab of poured concrete (k = 1.148 W/m degree) with both of side surfaces maintained at a temperature of 20 degree Celsius. During its curing, chemical energy is released at the rate of 80 W/m3. Workout the maximum temperature of concrete
  ক

  30.73 degree celsius

  খ

  29.73 degree celsius

  গ

  28.73 degree celsius

  ঘ

  27.73 degree celsius
• Generally heat generated depends on some parameters. It is directly proportional to
  ক

  Time

  খ

  Conductivity

  গ

  Voltage

  ঘ

  Distance between plates
• Which one of the following materials are quickly heated by applying high frequency?
  ক

  Textiles

  খ

  Engines

  গ

  Rubber

  ঘ

  Coal