Control Charts for Nonconformities (Defects) MCQ
Test your knowledge with important Control Charts for Nonconformities (Defects) MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Control Charts for Nonconformities (Defects) MCQs on Bissoy. Bissoy App
-
The defects which affect the proper working of the unit in the service arena, are called ____________
-
For construction of the control charts for nonconformities, the inspection unit must be same for each sample.
-
A serious defect is defined as the defect which makes the unit totally unfit for use.
-
What is the value of the center line of the demerits per unit?
-
The number of demerits in a system having ciA,ciB,ciC,and ciD defects in classes A, B, C, and D respectively is expressed by ______ It is assumed that the probability of each defect varies according to a Poisson distribution.
-
Moderate defects are classified into which class of demerit system?
-
The minor finish, appearance, or quality of work defects are generally classified in _____ of the demerit system.
-
The minor defects are put into class ____________ of the demerit system.
-
The Class A defects are ____________
-
Serious defects are put into which class according to the Demerit system for attribute data?
-
In a demerit system for defects, how many classes are defined for defects to be classified?
-
The method of average sample size is used when there is _____
-
If there is variable sample size to be used with the u-chart or average number of nonconformity per unit chart, which of these methods, is used?
-
The OC curve of the c-chart is a curve which plots β-risk against _______
-
Defect or nonconformity data are always lesser informative than fraction nonconforming.
-
The Lower control limit has a 6 unit distance from the upper control limit of the standardized control chart.
-
The center line of the standardized control chart designed for u-chart, is given by _____
-
What is the Upper control limit for the standardized control chart for u-chart with variable sample size?
-
Which of these is used in the standardized chart for u-chart with variable sample size?
-
What is the center line value for the average number of events control chart, when there is no standard given?
-
The control charts developed for the average number of events is generally called ______________
-
The control chart for total number of events is called ____________
-
Count rate of a defect is defined as _____________
-
The sample for the control chart for nonconformities is assumed to have, a variable sample size, and the sample conformities distributed according to Normal distribution.
-
For a control chart for nonconformities, the sample size can only be 1.
-
The control chart used to inspect the process state by using the average number of nonconformities per unit data, is called _______________
-
With c-chart, which of these is used to analyze nonconformity data?
-
The center line for the control chart for nonconformities is representing the value equal c, which is ____________
-
What will be the value of the 3-sigma Upper control limit for the c chart when standard is given?
-
Which of these is not an assumption of the c-chart?