Test my Merit My Results Create Exam

Higher Study | Reinforced Concrete Structures

Introduction Prestress Concrete Bond Columns
When shear stress exceeds the permissible limit in a slab, then it is reduced by
In an under reinforced section, the depth of actual neutral axis is# in PSSSB Jr. Draftsman Official Paper Download PDF Attempt Online View all PSSSB Junior Draftsman Papers >
For continuous beams, the distance between two points of zero moments in the beam may be assumed as
As per Indian Standard specifications, standard concrete is designated into
Minimum grade of concrete to be used in reinforced concrete is
Lateral ties in RCC columns are provided to resist
In a cantilever beam carrying gravity load, main reinforcement is provided
The maximum percentage of moment redistribution allowed in RCC beams is
A short column 20cm × 20cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 1300 kg/cm2 , the Safe load on the column, should not exceed
In the case of columns of minimum dimension of 200 mm or under, whose reinforcing bars do not exceed 12 mm, a nominal cover may be provided
According to IS 456:2000, a pedestal is a compression member whose
Which type of foundation is preferred in places where heavy concentrated loads are to be distributed over the whole floor area?
In reinforced concrete, pedestal is defined as a compression member, whose effective length does not exceed its least lateral dimension by
The foundation whose length is considerable greater than its width is:
A reinforced concrete circular section of 50,000 mm2 cross-sectional area carries 6 reinforcing bars whose total area is 500 mm2. If the concrete is not to be stressed more than 3.5 MPa and modular ratio for steel and concrete is 18, the safe load the column can carry will be nearly
Ads