Test my Merit My Results Create Exam

Higher Study | Fluid Mechanics | Pressure Measurement

A simple U tube manometer connected to a pipe in which liquid is flowing with uniform speed will give which kind of pressure?
Which of the following is not a unit of pressure?
When shear stresses are present in a fluid, the pressure at a point is:
What is used to empty a channel when it is NOT provided with any sluice?
Mercury is being used as fluid in a manometer, what property of mercury mainly allows the manometer column to be shorter when compared to other fluids?
Blood pressure is measured by mercury manometer and a stethoscope by wrapping a closed air-filled jacket around the upper arm of a person at the level of the heart. The systolic pressure (the maximum pressure when the heart is pumping) and the diastolic pressure (the minimum pressure when the heart is resting) of a healthy person are indicated as 120/80 respectively. These values are expressed in:
When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called-
When can a piezometer be not used for pressure measurement in pipes.
Which of the following equipment follows the Pascal’s law where the pressure is distributed evenly to raise the ram?
Which pressure measurement device has its construction wherein, a hollow metal tube is bent like a hook and the end is closed, connected to dial indicator? 
The figures show the cross-section of an oil pipe with a manometer attached. On the right side of the manometer, the manometer fluid is in contact with oil, and on the left side, the manometer is open to the atmosphere. The oil has a specific gravity of 0.85 and the manometer fluid has a specific gravity of 1.5. What is the gauge pressure at the center of the pipe if hm is 10 cm and ho is 5 cm?
A U-tube manometer is connected to a pipeline conveying water as shown in the figure below. The pressure head of water in the pipeline is
The reading of gauge A shown in the figure below is
The tank shown in figure below is closed at top and contains air at a pressure at top and contains air at a pressure of PA. The manometer have mercury as the manometric fluid. The value of PA for the manometer readings shown will be
An air pressure intensity at A is 1/10 N/mm2 (absolute) having h1 = 0.25, h2 = 0.15. What is the pressure at B (absolute)?
Ads